Etanorm Model

DECRIPTION

Etanorm Horizontal KSB Pump

H-max:           160,00 m

Q-max:           740 m³/h

Description:
Horizontal, long-coupled, single-stage volute casing pump with ratings and main dimensions to EN 733 in back pull-out design, with replaceable shaft sleeves / shaft protecting sleeves and casing wear rings. Design to ATEX. 

Overview of Technical Data:

Type of bearing	Ball bearings
Casing partition	Radially split
Drive frequency	50 Hz / 60 Hz
Type of drive	Electric motor
Drive voltage	Low voltage
Explosion protection	IP 55
No. of impeller entries	Single entry
Impeller material (EN standard)	1. 4408 / A743 GR CF8 M;CC480K-GS / B30 C90700;JL1040 / A 48 CL 35B
Type of installation	Long- coupled
Type of coupling	Direct
Type of lubrication	Grease / Oil lubrication
Max. permissible fluid temperature	140 °C
Guaranteed to be silicon-free	Yes
Nozzle position	End suction
Maximum rated pressure (discharge)	PN 16
Pull-out design	Yes
Pump set location	Dry installed
Shaft material (EN standard)	1. 4571;C45+N
Standard	EN; EN / ANSI
Suction characteristics	Non- priming
Suitable for drinking water	Yes
Type of casing	Volute casing
Type of impeller	Closed / Radial
Type of connection	Flange
UNSPSC classification	4015150300
Casing material (EN standard)	1. 4408 / A743 GR CF8 M;CC480K-GS / B30 C90700;JL1040 / A48CL35B;JS1030 / A536 GR 60-40-18
eClass assignment	36410000; 36410100;36410101
Maximum head	160, 00 m
Minimum head	2, 00 m
Installation position	Horizontal
Shaft seal type	Mechanical seal; Gland packing
Main applications	Industry and process engineering; Water;Energy;Building services
Casing material	Cast iron; Stainless steel;Nodular cast iron;Bronze
Maximum discharge-side pressure	16 bar
Type of installation	Stationary
Maximum flow rate	740 m³/h
Minimum flow rate	1, 50 m³/h
Maximum speed of rotation	3. 500 1/min