Model Etanorm
THÔNG TIN SẢN PHẨM
Bơm trục ngang tăng áp KSB Etanorm
H-max: 160,00 m
Q-max: 740 m³/h
Mô tả bơm KSB Etanorm trục ngang tăng áp:
Horizontal, long-coupled, single-stage volute casing pump with ratings and main dimensions to EN 733 in back pull-out design, with replaceable shaft sleeves / shaft protecting sleeves and casing wear rings. Design to ATEX.
Ứng dụng:
Bơm KSB Etanorm trục ngang tăng áp được ứng dụng trong việc phun tưới tiêu, thủy lợi, cấp thoát nước, cấp nước nóng, hệ thống cấp nước, hệ thống sưởi ấm và điều hòa không khí, vận chuyển condensate, hồ bơi, hệ thống phòng cháy chữa cháy, xử lý nước nóng, nước làm mát, nước chữa cháy, dầu, nước muối, uống nước, nước lợ, nước dịch vụ, v.v
Mô tả chi tiết:
| Type of bearing | Ball bearings |
| Casing partition | Radially split |
| Drive frequency | 50 Hz / 60 Hz |
| Type of drive | Electric motor |
| Drive voltage | Low voltage |
| Explosion protection | IP 55 |
| No. of impeller entries | Single entry |
| Impeller material (EN standard) | 1. 4408 / A743 GR CF8 M;CC480K-GS / B30 C90700;JL1040 / A 48 CL 35B |
| Type of installation | Long- coupled |
| Type of coupling | Direct |
| Type of lubrication | Grease / Oil lubrication |
| Max. permissible fluid temperature | 140 °C |
| Guaranteed to be silicon-free | Yes |
| Nozzle position | End suction |
| Maximum rated pressure (discharge) | PN 16 |
| Pull-out design | Yes |
| Pump set location | Dry installed |
| Shaft material (EN standard) | 1. 4571;C45+N |
| Standard | EN; EN / ANSI |
| Suction characteristics | Non- priming |
| Suitable for drinking water | Yes |
| Type of casing | Volute casing |
| Type of impeller | Closed / Radial |
| Type of connection | Flange |
| UNSPSC classification | 4015150300 |
| Casing material (EN standard) | 1. 4408 / A743 GR CF8 M;CC480K-GS / B30 C90700;JL1040 / A48CL35B;JS1030 / A536 GR 60-40-18 |
| eClass assignment | 36410000; 36410100;36410101 |
| Maximum head | 160, 00 m |
| Minimum head | 2, 00 m |
| Installation position | Horizontal |
| Shaft seal type | Mechanical seal; Gland packing |
| Main applications | Industry and process engineering; Water;Energy;Building services |
| Casing material | Cast iron; Stainless steel;Nodular cast iron;Bronze |
| Maximum discharge-side pressure | 16 bar |
| Type of installation | Stationary |
| Maximum flow rate | 740 m³/h |
| Minimum flow rate | 1, 50 m³/h |
| Maximum speed of rotation | 3. 500 1/min |
